Smart Home 433Mhz 12V 1CH Mini Relay Wireless RF Remote Control Switch

Please Note:
If you need the transmitter to work with your own receiver, you must make sure 100% that your receiver is 433mhz Frequency, does your receiver have a learning button to learn the transmitter code? And does your receiver can be compatible with 1527 ic chip transmitter. Whether the receiver and transmitter can work together or not, their frequency, IC chip and shock resistance must be taken in to consideration.

Features:
*Super small body, and it occupies less space. The receiver board size is only about 3.5*1.5*0.8cm. Customizable special code: MCU type. 
*Very convenient to use, simple wiring diagram connection way. Three working modes: momentary, toggle, latching three modes.
*Wireless control LED lamp string, Christmas tree light string, light control switch, router, shop light box signboard, glowing signboard, monitoring equipment, servers, alarm devices, etc.
*Optional fixed encoding type: PT2262 / EV1527 / HT6P20B Learning code. Support remote control up to 20 pieces.
*Learning pair code: it can work with any remote control with the same frequency, so you needn't worry about losing remote control any more. (If the remote control is lost, buy one and pair with the PCB board is OK.)

Application environment:
Remote control switch, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, remote control motorcycle, remote control electric cars, remote control MP3.

Specifications:
Mini Relay Switch:
Working voltage: DC 3.7V~12V
Maximum load: 2A
Static current: 3.6mA ~ 5.5mA
Working frequency: 433MHz
RF working mode: superheterodyne reception
Reception sensitivity: ≥ -107dBm
Support coding format 1527 learning code
Input: DC 3.7V~12V
Output: DC 3.7V~12V
Modulation mode: ASK (superheterodyne)
Working mode: Momentary, Toggle, Latching Mode
Number of stored remote controls: ≤ 20
Learning style: Learning Button
Working temperature: -20 degrees 80 degrees.
Board size: 35mm * 15mm * 8mm (length * width * high)
Remote Control:
Operating frequency: 433.92MHz
Power by: 3V CR2016 Button Battery  (Battery included )
Material: PVC
Button: 2 button
Size(Each): 62mm * 28mm * 12mm
Operating voltage: 3V 
Operating Current: 12mA
Transmitting power: 10mw
Modulation mode: ASK (AM)
Encoding type: Learning
Transfers distance: 80m

Pairing & Delay:
Jog code pairing: After turning on the power, press the learning button once to let go, the LED flashes once to enter the learning state, press the remote control A button, the LED flashes off and the learning is successful.
Self-locking Code Pairing: After turning on the power, press the learning button 2 times to release your hand, and the LED flashes 2 times to enter the learning state. Press the remote control A button, and the LED flashes off to learn successfully.
Interlocking Code: Press the learning button 3 times after the power is turned on, the LED flashes 3 times to enter the learning state, press the remote control A key, the LED flashes 3 times immediately, then press the remote control B key, the LED flashes off and learns success.
Delay for Five Seconds: Press the code button on the control board 4 times in a row, the LED indicator flashes 4 times. After the LED indicator lights up, press the remote control button that needs to be coded. The LED indicator on the control board blinks 3 times in a row. The code was successful.
Delay for Ten Seconds: Press the code button on the control board 5 times in succession, and the LED indicator flashes 5 times. After the LED indicator lights up, press the remote control button that needs to be coded. The LED indicator on the control board blinks 3 times. Code success.
Fifteen Seconds: Press the code button on the control board 6 times in succession, and the LED indicator flashes 6 times. After the LED indicator lights up, press the remote control button that needs to be coded. The LED indicator on the control board blinks 3 times. Code success.
If you want to change the working mode, please clear the code first: after pressing the learning button on the control panel for 8 consecutive times, all the remote controllers that learn the code will be automatically cleared. After clearing, the remote control that had learned the code will no longer be controlled.
(The A and B keys are for reference only. The actual remote control keys are subject to change.)

Package Information:
1PCS: Package Size: Approx. 12*10*4cm / 4.7*3.9*1.6in
          Package Weight: Approx. 38g / 1.3oz / 0.08lb
2PCS: Package Weight: Approx. 68g / 2.4oz / 0.15lb

Package List:
1 * Mini Relay Switch
1 * 4 Pin Cable
1/2(optional) * Remote Control