Motorcycle Drag Pipe Exhaust with Heat Header Insulation Tape For Dyna FXD FXDWG

• Brand NEW Triple Chrome Over Stainless Steel 2" Drag Exhausts for the following:

• Tech Note: Made out of Stainless Steel then Triple Chromed. 

• 18MM o2 Bungs are welded on each exhaust pipes and it also comes with 2x plugs for the o2 bungs

• if your bike doesn't have any o2 sensors.  Supplied bracket to mount the 2 pipes together. Does not include bracket to mount to the motor.  The more expensive model does.  These were not intended for the Dyna, Touring Models, or Buell Lightning X1. You may need to make minor adjustments or modifications. The bracket that holds the pipes together will NOT work in many cases. You may have to make some modifications to the bracket or make your own bracket. It shouldn't be to difficult, you just have to fine a method to secure the two pipes together and not to the frame. On Dyna and some Touring models the oil cap will not be accessible without loosening or removing the pipes. The pipes are light and super easy to remove so this should not be a big deal. On newer Dynas if using the OEM air cleaner you may need to notch it to get it to clear the pipes or some after market air cleaners will clear. These were not intended for the Dyna or Touring models so you may have to make minor modifications to get an exact fit. Most 2010+ models will need a power commander which eliminates the o2 sensors or an adapter kit that sizes down from an 18MM to 12MM port. 

• Color: Chrome Or Black Color

Fit For:

• For 1986-2015 Softail Models with FORWARD CONTROLS & FLOORBOARDS

• For 1984-2015 Touring Models

• For 1986-2013 Sportster Models with FORWARD CONTROLS ONLY

• For 1991-2014 Dyna FXD & FXDWG Models with FORWARD CONTROLS 

• For Choppers / Bobber / Customs with either Left or Right side drive