SEQURE SQ-SW1 Spot Welder Portable DIY Welding Machine OLED Display with Nickel Sheet Foot Pedal Automatic Manual Modes 10-14V Input Voltage for RC Models Toys Drone Battery Electronics Motor

This spot Welding Machine with a compact size that you can carry along, and has 2 modes you can choose-automatic and manual, and it's able to solder most types of items, for example, battery, motor, Solar cell, wire, cable, etc. Widely used in auto parts, electronics, electrical appliances, motors, refrigeration equipment, hardware products, batteries, solar energy, transportation equipment, toys and other industries.

Features:
★[Wide Usage Range] The Spot Welding Machine can apply to various items such as a cylindrical lithium battery, a nickel-hydrogen battery, cadmium nickel battery, and cables for a motor. It can be used in the home to install your electric appliance or RC models.
★[Variety Voltage Range] There is a wide range of input voltage you can choose 10V to 14V. We recommended a 12V 400-800CCA automobile battery,3S 500mAh minimum 60C lithium battery to support the product.
★[Automatic Modes & Manual Modes] SW1 intelligently switches between automatic and manual working mode, enters the main menu page, easy for you to use in different workplaces, enters the main menu page.
★[OLED Screen] Showing clear data, and you can check the parameters by knowing the status of SW1 in real-time.
★[Small & Portable] With the size of the palm of your hand, comparing with the traditional one, this SW1 is very compact and convenient to take out or carry with the luggage.

Specification:
Item No.: SQ-SW1
Item Name: Spot Welding Machine
Material: 304 Stainless Steel, ABS
Input Voltage: 10-14V
Trigger Delay: 0.5-3s
Pulse Time: 1-100ms (default),1-500ms (setting)
Short Pulse: 0-100%
Warning: Low/High Voltage
Welding Thickness: 0.1-0.3mm
Screen Flipping: 180°
Work Model: Automatic/Manual
Power Supply Interface: XT90
Recommended Battery: Lithium battery(3S 5000mAh minimum 60C) Car battery (12V 400-800CCA)
Size: 110 x 93 x 45 mm
Weight: 642g

Safety Tips:
1. The two electrodes and solder pins should not be touched together to avoid short circuits.
2. Pay attention to the correct wiring. Refer to the manual for the specific wiring method.
3. When using for the first time, set the welding pulse duration to 2ms and check the welding result. According to the actual welding situation, set the appropriate welding pulse duration step by step to obtain good welding.
4. If you use higher current or non-factory parts, you need to take the risk yourself.

Package Information:
Size: 26 x 19 x 13 cm
Weight: 1320g

Package List:
1 x Spot Welding Machine
1 x Welding Pen
1 x Nickel Stripe
1 x Foot Pedal
2 x Solder Pin (Installed)
2 x Battery Holder