- Nomor item pedagang：E14184B
This product is an useful receiver in your daily life. With AM, SSB, NFM，WFM，CW ana-log modulation that supports demodulation, with 3.5 inch touching IPS display screen, you can use it more clearly. 4-layer board structure, better than two-layer PCB, has a long service, come on and try it.
Features:
The receiver is based on the principle architecture and its functions are determined by the loaded software.
Frequency range: from 50 kHz to 200 MHz (default version), users can contact official website to upgrade to 50 kHz~250 MHz, 400 MHz~2 GHz.
All types of ana-log modulation: AM，SSB，NFM，WFM.
multifunction: variable filter width, adaptive noise suppressor, threshold noise suppressor, noise blanker，AGC, balancer.
The reception on built-in telescope or external antenna is to improve the HF reception on telescope antenna, and an additional board with source follower has been developed. The board will be built into standard receiver design.
Connect to computer via USB, which can transfer CA-T, IQ and audio.
It is powered by an external TYPE-C interface or battery, which can be recharged by TYPE-C.
The device supports UHF frequency band, operation mode includes two EC11 pulse encoders and capacitive touching screen.
With backlight control and SMA female antenna socket.
Specifications:
Material: PCB
Color: black, blue, red(optional)
Frequency: 50kHz-200MHz
Chip: msi001
Battery: 1 * lithium battery, 2000mAh (included)
Consumption: 300mA
Screen display bandwidth: 160kHz
Sensitivity: 0.3μV(at 250MHz)
Dynamic blocking range: 85dB
Processor: STM32H743
Package size: 100 * 68 * 32mm / 3.9 * 2.7 * 1.3in
Package weight: 285g / 10.1ounce
Packing list:
1 * Set of Receiver
1 * Pull Rod Antenna
Features:
The receiver is based on the principle architecture and its functions are determined by the loaded software.
Frequency range: from 50 kHz to 200 MHz (default version), users can contact official website to upgrade to 50 kHz~250 MHz, 400 MHz~2 GHz.
All types of ana-log modulation: AM，SSB，NFM，WFM.
multifunction: variable filter width, adaptive noise suppressor, threshold noise suppressor, noise blanker，AGC, balancer.
The reception on built-in telescope or external antenna is to improve the HF reception on telescope antenna, and an additional board with source follower has been developed. The board will be built into standard receiver design.
Connect to computer via USB, which can transfer CA-T, IQ and audio.
It is powered by an external TYPE-C interface or battery, which can be recharged by TYPE-C.
The device supports UHF frequency band, operation mode includes two EC11 pulse encoders and capacitive touching screen.
With backlight control and SMA female antenna socket.
Specifications:
Material: PCB
Color: black, blue, red(optional)
Frequency: 50kHz-200MHz
Chip: msi001
Battery: 1 * lithium battery, 2000mAh (included)
Consumption: 300mA
Screen display bandwidth: 160kHz
Sensitivity: 0.3μV(at 250MHz)
Dynamic blocking range: 85dB
Processor: STM32H743
Package size: 100 * 68 * 32mm / 3.9 * 2.7 * 1.3in
Package weight: 285g / 10.1ounce
Packing list:
1 * Set of Receiver
1 * Pull Rod Antenna
Review
100%komentar favorit
berbagi0Ginseng dan ratingEvaluasi produk